- Information
- Manuals
- Downloads
- Confirmation
- FAQ
Listing items from 1 to 20 of 20 results.
- Q.How do I set my Roland editor software to communicate with my keyboard/sound module so that I can edit sounds from the PC?
-
A.
Many Roland keyboards and sound modules come with ･･･
- Q.What kinds of sampling rates and bit rates of WAV / AIFF files can the Fantom-S / Fantom-S88 load ?
-
A.
Any sampling rates less than 96kHz, and bit rates 8 / 16 / 32 ･･･
- Q.Could you explain about the effect part of the Fantom-S and Fantom-S88 ?
-
A.
The Fantom-S / Fantom-S88 equipped with the independent 3 ･･･
- Q.What can I do with the real time control knobs ?
-
A.
You can adjust the filter and envelope, control the arpeggio / ･･･
- Q.What can I do with the D Beam of the Fantom-S / Fantom-S88 ?
-
A.
You can assign any MIDI control change messages such as filter ･･･
- Q.What are the differences of the Fantom-S88 when compared with the Fantom-S ?
-
A.
The Fantom-S88 uses a weighted 88-note keyboard whereas the ･･･
- Q.What is the Skip Back Sampling function ?
-
A.
The Skip Back Sampling function allows you to keep previously ･･･
- Q.What is the maximum sampling time ?
-
A.
The maximum sampling time of the Fantom-S / Fantom-S88 is ･･･
- Q.What is the usable range of the D Beam controller? Can it be changed?
-
A.
The above diagram shows the usable range of the D Beam ･･･
- Q.How can I restore the factory settings of the Fantom-S / Fantom-S88 ?
-
A.
This restores all data in the Fantom-S / Fantom-S88 to the ･･･
- Q.What kind of memory media is compatible with the Fantom-S / Fantom-S88 ? What is the maximum size of the memory for expansion?
-
A.
In the Fantom-S / Fantom-S88, there are two external memories, ･･･
- Q.What can the Fantom-S / Fantom-S88 do with the USB port ?
-
A.
The USB port of the Fantom-S / Fantom-S88 are designated for ･･･
- Q.How can I make original rhythm pattern or arpeggio phrase with the Fantom-S / Fantom-S88 ?
-
A.
When you make the rhythm pattern or arpeggio phrase on the ･･･
- Q.What can I do with the Dynamic Pad Bank of the Fantom-S / Fantom-S88 ?
-
A.
V-LINK is Roland's original function that links music and ･･･
- Q.What is the V-Link function ?
-
A.
V-LINK is Roland's original function that links music and ･･･
- Q.What is the major differences of the Fantom-S when compared with the Fantom ?
-
A.
When compared with the Fantom, the Fantom-S adds these new ･･･
- Q.What is the Sampler function of the Fantom-S ?
-
A.
The Fantom-S / Fantom-S88 employs 16-bit linear sampling in ･･･
- Q.When I playback a MIDI song using an XP/XV/RS/JUNO/JV/Fantom-series instrument, only one instrument plays. Why does this happen?
-
A.
Most likely, Patch mode has been selected by mistake. ･･･
- Q.When I connect my computer via USB to a product such as the Fantom-X6, can I format its user or card memory, optimize the memory, or perform operations such as "scan disk" from the computer?
-
A.
No, you cannot perform such operations from your computer via ･･･
- Q.Can I reproduce the original patches of the SR-JV80 Expansion Boards on a Fantom-S or Fantom-X series instrument using the SMF data from the CD-ROMs included with the SRX-06 - 09?
-
A.
This is not possible. Only the XV series and the original ･･･
- Product Support
- Link
Visit your local Roland website via the www.roland.com home page.
All content included on this website is the property of Roland Corporation. All company names, product names and logo marks mentioned in this website are registered trademarks or trademarks of Roland Corporation or their respective owners.
Copyright © 1999-2013 Roland Corporation. All Rights Reserved.