Fantom

Listing items from 1 to 20 of 27 results.

<< Prev   |12|    Next >>

Q.Sometimes when I go back to a Performance I get a different sound from when I played it before. I wonder why this happens ?

A.

This can happen when an edit is performed on a Part or when ・・・

Q.Can the XV series / Fantom load Performance data from the JV series and XP series ?

A.

The XV series / Fantom cannot load Performance data created on ・・・

Q.Can the XV series / Fantom load Patch/Rhythm Set data of the JV series and XP series using the Bulk Dump function?

A.

YES. The Patch/Rhythm Set data created on ・・・

Q.What is the major differences of the Fantom-S when compared with the Fantom ?

A.

When compared with the Fantom, the Fantom-S adds these new ・・・

Q.Can I use more than one multi effects at a time?

A.

In Performance Mode up to three multi effects are available at ・・・

Q.What is the sampling rate and bit rate of the digital signal coming out from the digital output jack?

A.

XV-5080 Sampling rate; 44.1kHz / 48.0 kHz (assignable) ・・・

Q.I would like to add the rotary speaker simulator to the distorted sound. Is it possible for me to do this?

A.

Since the XV Series take advantage of multiple effects ・・・

Q.Can I use three MFXs in a serial connection in the Performance mode ?

A.

This is not possible. In the Performance mode, each output of ・・・

Q.The LCD screen sometimes becomes difficult to read. Why does this happen ?

A.

The LCD screen of the XV-3080/XV-88/XV-5080/XV-5050 is ・・・

Q.Sometimes I hear a distorted noise which sounds like a scratch coming out from the headphone or the line out when I play several tones at a time. Can I get rid of this noise ?

A.

The XV-5050/Fantom/XV-2020 are designed so that one patch can ・・・

Q.I got a sudden change to the sound of the Patch which I registered in the FAVORITE LIST (FAVORITE SOUND). Why did this happen ?

A.

The Favorite List saves the Bank and Number of the Patch being ・・・

Q.What are the differences among the output jack A(MIX), B, C, D and other output jacks ?

A.

In the standard setting, all the sound including the effect ・・・

Q.I cannot get enough Chorus (Delay) or Reverb sound in the Performance mode, even though I raise the send level of the Chorus (Delay) or the Reverb considerably. Why does this happen?

A.

The XV series has a parameter to control the send level for ・・・

Q.: Is it possible to set the Patch: Chorus and Reverb send levels regardless of whether or not the Multi Effect (MFX) is used ?

A.

The send level for the Chorus and the Reverb can be set ・・・

Q.Does the XV series work as a GM2 sound module when receiving the "GM2 System On" MIDI message ?

A.

The XV series can work as a GM2 sound module when receiving ・・・

Q.How can I set the effect individually on a specific instrument in a Rhythm Set ?

A.

The XV-3080/XV-88/XV-5080/XV-5050/Fantom 1. Set the Tone ・・・

Q.Both Volume and Pan are reset when I select a new Patch in Patch Mode. Why is this?

A.

Set Patch Remain to ON so that the Control Change information ・・・

Q.When the Performance Control Channel of an XV series is set to the same MIDI channel as a Part, what will happen when they receive the same MIDI messages ?

A.

When the XV series receives a Program Change and a ・・・

Q.I set up a Key Range in the Performance Mode. But sometimes the actual key range turns to be narrower than my setting. Why is this ?

A.

The Key Range setting can also be set in each Patch of your ・・・

Q.What will happen if I lose power during tone editing ? Also, what will happen to my edited patch if I select a different one?

A.

It will disappear. If you want to retain the contents of an ・・・

<< Prev   |12|    Next >>

To the top of page