Fantom

Q.Can I use three MFXs in a serial connection in the Performance mode ?

A.This is not possible. In the Performance mode, each output of the Patches goes to the three MFXs in parallel. You can assign each output to either one of three MFXs, or bypass them directly to one of the outputs.

For example, Part 1 and 2 to MFX A, Part 3 and 4 to M-FX B, Part 5 to MFX C, and others passing through MFX and directly to an output.

(2003/08/22)

To the top of page