CM-30

CUBE Monitor

Q.I want to use the CM-30 as a personal stage monitor and simultaneously send its output to a PA system. However, the CM-30 is not equipped with a line out jack. How can I connect the CM-30 to a PA system?

A.The CM-30 is not equipped with a line out jack. However, you can use the PHONES jack to send the CM-30's output to a PA system. Use the STEREO PHONES LEVEL knob to adjust the output level from the PHONES jack. (Sound is still heard from the CM-30's internal speaker even if a cable is connected to the PHONES jack.)

Note:
The PHONES jack uses a 1/4-inch TRS (stereo) connector. A "Y" cable (1/4-inch TRS jack to two 1/4-inch TS (mono) jacks) may be required to connect the PHONES jack to the PA system's inputs.

(2006/02/09)

To the top of page