CM-30

CUBE Monitor

Q.Can I use two CM-30 units as simple stereo PA system?

A.Yes. The CM-30's Stereo Link function allows you to use two CM-30 units as a simple stereo PA speaker system.

Connect the units as shown below:


Stereo Link with One Cable
Using a 1/4-inch TS cable, connect the STEREO LINK OUT (R) of the first CM-30 unit to the STEREO LINK IN of the second CM-30 unit. The first CM-30 unit will reproduce the left (L) signal, and the second unit will reproduce the right (R) signal (mono signals will be reproduced by both speakers equally). In this scenario, only the inputs of the first CM-30 are available (five total inputs).




Stereo Link with Two Cables
Using two 1/4-inch TS cables, connect the STEREO LINK OUT of each unit to the STEREO LINK IN of the other unit. When connected in this manner, all input channels on both CM-30 units are available (ten total inputs).


For more about the CM-30's input specifications, see the related FAQ:
How many inputs does the CM-30 have, and what types of equipment can I connect to them?

(2006/02/09)

To the top of page