Listing items from 1 to 20 of 26 results.
- Q.Can I output HD and SD video mixed by V-440HD as an SD signal?
-
A.
No. Mixed video is output as HD or RGB signal.
- Q.When inputting HD/RGB video to V-440HD, can I specify the format to HD or RGB per channel?
-
A.
Yes. V-440HD allows you to select HD or RGB for each channel ･･･
- Q.Can I display the menu screen of V-440HD on the monitor connected to the HD OUT terminal or RGB OUT terminal?
-
A.
Yes. While pressing and holding the SHIFT button, press ･･･
- Q.For the HD/RGB IN input of V-440HD, can I input videos from the analog component (BNC) terminal and Dsub terminal of the same input channel simultaneously and then switch them for output?
-
A.
No. You cannot input videos from the analog component (BNC) ･･･
- Q.Can I mount V-440HD in a rack?
-
A.
Yes. V-440HD is equipped with the rack mounting metal fixture.
- Q.In the multi-screen output screen of V-440HD, only the center portion of the input video is displayed.
-
A.
If you select 2×1, 3×1, or 3×2 in Multi ･･･
- Q.Can I remotely control V-440HD from an external device?
-
A.
Yes. V-440HD supports V-LINK, RS-232C, and MIDI, and can be ･･･
- Q.Is V-440HD equipped with a frame synchronizer?
-
A.
Yes, V-440HD is equipped with a frame synchronizer on each of ･･･
- Q.Is V-440HD compliant with RoHS (Restriction of Hazardous Substances Directive)?
-
A.
Yes, V-440HD is RoHS-compliant.
- Q.When inputting HD/RGB video to V-440HD, can I select the Dsub terminal (15-pin) and BNC terminal separately for each channel?
-
A.
Yes. You can select one of the terminals for each channel.
- Q.Does V-440HD require fixing synchronization between video devices by master clock (GenLock)?
-
A.
GenLock is not required. V-440HD is equipped with two frame ･･･
- Q.Can I input SD video to V-440HD as analog components?
-
A.
Yes. To input SD video to V-440HD as analog components, ･･･
- Q.What parameters are saved with the panel preset button of V-440HD?
-
A.
The following parameters are saved with the panel preset ･･･
- Q.Is V-440HD equipped with HD-SDI terminal?
-
A.
No (for both input and output).
- Q."1080/60i", "720/60p", "480/60i", and "480/60p" are displayed as the component output format of V-440HD. Do the multi-format converters VC-300HD/VC-200HD support these formats for video input?
-
A.
Yes. The vertical synchronization frequencies of the output ･･･
- Q.When I press the [P in P] button in the HD/RGB section of V-440HD, the child window does not appear.
-
A.
To display the child window of the Picture-in-Picture function ･･･
- Q.How is the menu screen displayed for V-440HD?
-
A.
When you press the MENU button, the menu appears on the ･･･
- Q.Does V-440HD support PAL?
-
A.
Yes. You can select from NTSC and PAL when changing ･･･
- Q.Can I specify the position and size of the child window of the Picture-in-Picture function for V-440HD?
-
A.
You can specify the position and size of the child window of ･･･
- Q.Can I use multiple V-440HD units as an HD switcher with four or more channels?
-
A.
Yes.
- Product Support
- Link
Visit your local Roland website via the www.roland.com home page.
All content included on this website is the property of Roland Corporation. All company names, product names and logo marks mentioned in this website are registered trademarks or trademarks of Roland Corporation or their respective owners.
Copyright © 1999-2013 Roland Corporation. All Rights Reserved.