Fantom-Xa

Music Workstation

Listing items from 1 to 20 of 20 results.

Q.How many SRX Wave Expansion Boards can be installed in a Fantom-X-series keyboard or Fantom-XR module?

A.

The number of SRX Wave Expansion Boards that can be installed ・・・

Q.What are the Fantom-X’s sampling capabilities?

A.

The Fantom-X’s sampling specification is: 16bit, linear ・・・

Q.How can I use the USB port on a Fantom-X series instrument?

A.

The Fantom-X series instruments are equipped with a USB port ・・・

Q.What is the maximum sampling time available on the Fantom-X/Fantom-XR?

A.

The maximum sampling time of each model is: ・・・

Q.What are the specifications for Fantom-X-compatible DIMM memory?

A.

The DIMM memory specifications required for compatibility with ・・・

Q.In a Fantom-X series instrument, can the volume of each tone in a rhythm set be adjusted individually?

A.

Yes. In a Fantom-X series instrument, the volume of each tone ・・・

Q.I understand that there's additional Fantom-S/S88 patch data for use with the SRX-03 Studio SRX and SRX-04 Symphonique Strings Wave Expansion Boards. Can this patch data be used with a Fantom-X series instrument equipped with the SRX-03 and/or SRX-04?

A.

The additional patch data for the SRX-03 and SRX-04 Wave ・・・

Q.What types of media can the Fantom-Xa use for data storage?

A.

The Fantom-Xa is equipped with a PC card slot that can use an ・・・

Q.What is the Fantom-Xa’s keyboard like?

A.

The Fantom-Xa features a newly developed 61-note ・・・

Q.Does the Fantom-Xa include the 88-note multi-sampled grand piano sound that is found in the top-of-the-line Fantom-X-series instruments?

A.

The Fantom-Xa doesn’t include the 88-note multi-sampled grand ・・・

Q.Can the Fantom-Xa send and receive MIDI messages and audio files to and from a computer through USB?

A.

Yes, the Fantom-Xa can communicate with a USB-equipped ・・・

Q.On the Fantom-X, can sample data be played in sync with the internal sequencer’s tempo?

A.

Yes. On the Fantom-X-series, you can play sample data in sync ・・・

Q.When I playback a MIDI song using an XP/XV/RS/JUNO/JV/Fantom-series instrument, only one instrument plays. Why does this happen?

A.

Most likely, Patch mode has been selected by mistake. ・・・

Q.Can I reproduce the original patches of the SR-JV80 Expansion Boards on a Fantom-S or Fantom-X series instrument using the SMF data from the CD-ROMs included with the SRX-06 - 09?

A.

This is not possible. Only the XV series and the original ・・・

Q.What is a Fantom-X multisample? How does it relate to patches or samples?

A.

A "multisample" is a set of different samples assigned to the ・・・

Q.When I connect my computer via USB to a product such as the Fantom-X6, can I format its user or card memory, optimize the memory, or perform operations such as "scan disk" from the computer?

A.

No, you cannot perform such operations from your computer via ・・・

Q.Is there a benefit to installing an SRX board in a compatible Roland synthesizer (such as Fantom-X-series) containing patches of the same name (such as “Orchestra” or “Strings”)?

A.

The purpose of the SRX-Series Wave Expansion Boards is to ・・・

Q.I’ve installed DIMM memory in my Fantom-X6/X7/X8/XR/Xa to increase the sampling time. However, when I try to save a long sample I get an error message telling me that I’ve exceeded the memory capacity. Since I have more memory now, why does this happen?

A.

To better understand why this might happen, let’s look at how ・・・

Q.What types of audio input and output jacks does the Fantom-Xa have?

A.

The Fantom-Xa is equipped with two analog input jacks ・・・

Q.Does the Fantom-X series support hard disk-type PC cards?

A.

No. The Fantom-X series does not support hard disk-type PC ・・・

To the top of page