CY-12R/C

V-Cymbal Ride/Crash

Listing items from 1 to 13 of 13 results.

Q.Can I connect two CY-15R (or CY-12R/C) units to the TD-20 and get three-way triggering on both cymbals?

A.

The TD-20 provides built-in support for only one three-way ・・・

Q.Other than the size, what are the differences between the CY-12R/C and the CY-14C / CY-15R ?

A.

V-cymbals have the same basic dual trigger functions. ・・・

Q.Both the CY-12R/C and the CY-15R have two outputs for the BOW/BELL and BOW/EDGE. Could you tell me how they can be used ?

A.

You can get three different sounds, Bow, Bell and Edge, when ・・・

Q.Could you tell me why I can't get the bell shot (or edge shot).

A.

If you want the bell shot with the CY-12R/C or the CY-15R, use ・・・

Q.How can I get the 3-way triggering feature and have the bow, bell and edge shot?

A.

Check the TD-10 to see if it has been upgraded with the TDW-1. ・・・

Q.Do the V-cymbals have to be mounted in a certain direction on a stand? Could I use it even if I turn it around ?

A.

The V-cymbals should be mounted with the Roland logo in the ・・・

Q.How should I connect the CY-12R/C or the CY-15R and the TD-10 to get the 3-way triggering feature with the bow / bell / edge ?

A.

First be sure the TD-10 has the TDW-1 with V cymbal Control ・・・

Q.I would like to use the CY-15R or CY-12R for the 3-way triggering feature, but the AUX1 and 2 trigger inputs of the TD-10 are being used already. Is there another way to connect it ?

A.

Use the optional TMC-6 Trigger MIDI converter. ・・・

Q.Can I mount the CY-12R/C / CY-14C / CY-15R on a cymbal stand made by other manufactures ?

A.

It is not always possible to mount the V-cymbals to other ・・・

Q.I lost the nuts and felts that came with the MDY-7U / MDY-10U. Can I still mount the CY-12R/C, the CY-14C, or the CY-15R without these parts ?

A.

The wing nut and felt for the V cymbal are provided with the ・・・

Q.Do the edge, bow and bell parts of the V cymbal(CY-12R/C CY-15R) produce a different sound, or does each section produce the same sound?

A.

The V cymbals (CY-12R/C CY-15R can produce a different sound ・・・

Q.Can I use a V-cymbal with a TD-8 that is at a software version earlier than 1.10? Also, can I use a V-Cymbal with older TD-series models or an SPD-series unit?

A.

Yes. You can use a V-Cymbal with the TD-8 (any software ・・・

Q.As for the TDW-1 with V-cymbal Control, what has been improved from the first TDW-1 ?

A.

The TDW-1 with V-cymbal control has the following new ・・・

To the top of page