VR-50HD

Multi-Format AV Mixer

UtilitiesVideo Capture for VR Ver.2.0 ( Windows 8 / 8.1 32-bit Edition )

Video Capture for VR is an application software of Windows 8 / 8.1 32-bit version for capturing UVC and UAC.

Products:V-4EX / VR-3 / VR-3EX / VR-5 / VR-50HD



For more information, refer to "Video Capture for VR Ver.2.0 - Owner's Manual ( Video_Capture_for_VR_v20_win_e02_W.pdf )."

Specifications of Version 2.0
  • The HD size (such as 1920 x 1080 or 1280 x 720) is supported.
  • YUV 4:2:2 uncompressed-format input was supported in addition to Motion JPEG.
  • Output files are transcoded in the H.264/AAC format in real time and containers are stored in the MP4 format. The video bit rate is as follows.
    Format Bit Rate
    1920x1080P60 30 Mbps
    1920x1080P30 15 Mbps
    1280x720P60 14 Mbps
    1280x720P30 7 Mbps
    720x480P60 5 Mbps
    720x480P30 2.5 Mbps
    1920x1080P50 26 Mbps
    1920x1080P25 12 Mbps
    1280x720P50 14 Mbps
    1280x720P25 6 Mbps
    720x576P50 5 Mbps
    720x576P25 2.5 Mbps

    * Each data is encoded with the screen size specified by Resolution and saved in a file.
    * The maximum recording time is 12 hours (within the maximum file size).
    * Still images are saved in the PNG file format.
  • Streaming files for the VR-5, the VR-3, and V-4EX which support SD videos in 480 pixels is supported.
  • A CPU occupancy rate meter is installed. The meter must indicate green zone or around the zone boundary between green and yellow, which is the allowable limit value. If the meter always indicates yellow or red zone, replace the machine with the one that has high processing capability or reduce the resolution to be input.

* Although this product supports Intel Quick Sync Video (hardware encoder), it is not used when a Roland UVC device is not connected.


DOWNLOAD AND EXPAND THE ARCHIVE FILE
Download the file named "VCapVR_w832_v20.zip".
It is an archive file in zip format, please double click on the file to expand. After expanding the file, "VCapVR_w832_v20" folder will be appeared.


STARTING THE APPLICATION
In the "VCapVR_w832_v20" folder, double-click "VRCapture8x86Install.exe".


SYSTEM REQUIREMENTS

OPERATING SYSTEM
Microsoft(R) Windows(R) 8 / 8.1 32-bit Edition
CPU / CLOCK
Intel Core i5 Series or faster
When recording data in the HD size, use a personal computer in which a USB 3.0 port are installed.

* This software has been found to work on typical computers that meet the above requirements, but we do not guarantee that it will operate on all such computers. Please be aware that differences in design or conditions of use may produce differences in the processing power of otherwise similar computers.
* As failures including the phenomenon that this software does not start in some computers were found, the SYSTEM REQUIREMENTS are updated. (2014.03.07)


* Microsoft and Windows are registered trademarks of Microsoft Corporation.
* All product names mentioned in this document are trademarks or registered trademarks of their respective owners.



License Agreement

Be sure to read the Safety Instructions and the License Agreement before proceeding download.

Download file

Supplementary file

[Video_Capture_for_VR_v20_win_e02_W.pdf]
ダウンロード (293.0 KB)

To the top of page