V-40HD

Multi-format Video Switcher

System ProgramV-40HD System Program (Ver.1.14)

This system program updates the V-40HD system program to the latest version 1.14.

Products:V-40HD



How to know the version
Before you start, check the system program version of your V-40HD.
  1. Turn V-40HD power OFF.
  2. While holding down [ OUTPUT FADE ], turn power ON.
  3. The version will be displayed at the Seven-Segment LED display.
  4. Turn power OFF.
* If this shows the latest version, there’s no need to update your V-40HD.

Update history
[ Ver.1.14 ]
[Bug Fixes]
The following bugs were fixed.
  • Images output from EDIUS Pro 5 through the HDMI connection are not displayed.
  • Images output from some video cameras through the HDMI connection are not displayed.
  • When the setting of the color spaces of input images is AUTO and images are input through the analog RGB port at the resolution of 1920 x 1080/60 Hz, the color spaces of them are sometimes not set correctly.
  • The Auto Sampling function for analog RGB input can be executed only when the preview is set to INPUT.

[ Ver.1.12 ]
[Bug Fixes]
The following bugs were fixed.
  • HDMI input signals are very rarely recognized.
  • The master screen is sometimes not displayed when PinP is displayed with "PIP" and "ATO" of the RS-232C command.

[ Ver.1.11 ]
[Additional Functions]
  • The "Audio Follow" function, which outputs the audio associated with video switching, is added.
    For the operation method, refer to "Linking Audio to Video (Audio Follow)" of the latest Owner's Manual.
  • The "Recall Lock" function, which disables the MEMORY button operation, is added.
    Turning on the "Recall Lock" of the System menu disables the MEMORY button operation.
  • The "Auto Memory" function, which stores the current setting to the internal memory automatically, is added.
    Turning on "Auto Memory" of the System menu writes the current setting to MEMORY 1-1 automatically. At the next start-up, the contents of MEMORY 1-1 will be read and the device status will be recalled.
[Functionality Improvements]
  • Switching operation by Video Fader or video switching by the AUTO button of DSK or TRANSITION has became smoother.
[Bug Fixes]
The following bugs were fixed.
  • After power-on, the TRANSITION indicator may not be displayed.
  • After power-on, the settings stored in MEMORY 1-1 may not be read.
  • When a preview output is connected to a monitor through HDMI Selector, the image may not be displayed on Preview Monitor.

[ Ver.1.05 ]
[Bug Fixes]
The following bugs were fixed.
  • With some laptop personal computer connected by an HDMI cable, the screen resolution of the personal computer was changed to QVGA.
  • With MacBook Pro equipped with Thunderbolt connected by analog RGB, OUTPUT from V-40HD and the output image color of the preview were incorrect.
  • If PinP was activated with the BUS ASSIGN of OUTPUT set to DSK, the OUTPUT image assigned to DSK was displayed in small size.
  • If OUTPUT ASSIGN was changed from PGM to PST with Chroma DSK ON, the PST output was affected by DSK.
  • The brightness level of the signal from the composite input became low.

[ Ver.1.04 ]
[Bug Fixes]
The following bugs were fixed.
  • A noise might occur fairly infrequently on booting up.
  • The output color space was incorrect on turning the HDCP mode on/off or switching the output mode between DVI-D and HDMI.
  • It did not store the parameters (Y Level, Pb Level, Pr Level, Gain) of Chroma 1 in DSK.
  • A misspelling in the DSK menu.

[Changed Specifications]
  • Removed "Letterbox," "Crop" and "Dot by Dot" from the scaling type in Outputs.


What you will need to update
  • V-40HD
  • USB Memory ( Roland's M-UF2G is recommended )
    * The USB Memory need to be formatted on a V-40HD.

Getting the update file
Please open/extract the downloaded "v40hd_sys_v114.zip" file on your computer to get the update file named "V-40HD.PRG" in the "v40hd_sys_v114" folder.

Procedure for the update
Creating the Update USB Memory
  1. Copy update files V-40HD.PRG to the root directory of a USB Memory.
Update Procedure
  1. Turn V-40HD power OFF.
  2. Connect USB memory to V-40HD's USB port. Turn the power on with pressing [ MEMORY STORE ] + [ PVW PGM ] + [ MENU ] buttons.
  3. Release the buttons after displaying "Upd." on the Seven-Segment LED display under [TRANSITION].
  4. The ".(dot)" indication on the Seven-Segment LED display moves from blinking to lighting. And then press [ENTER] button to start updating.
  5. The Seven-Segment LED display displays "OK". And then turn V-40HD power OFF.
  6. Turn the power ON again with pressing [ MEMORY BANK ] and [ PVW INPUT ].
    The Seven-Segment LED display displays "ddC". After about 30 seconds, "OK" appears and all the indications are turned OFF.
    After about 10 seconds, V-40HD automatically restarts. This is the end of the update.
    * If the Seven-Segment LED display displays "Err", turn the power OFF and proceed from step "5"
  7. Turn the power off and un-mount the USB memory from V-40HD.
  8. While holding down [ OUTPUT FADE ] button, turn power ON.
  9. Check the version number on the display.
  10. Turn V-40HD power OFF.



License Agreement

Be sure to read the Safety Instructions and the License Agreement before proceeding download.

Download file

To the top of page