UpdatesS-4000S / S-4000H System Program Ver.2.500
This program is used to update the S-4000H, S-4000S-3208, S-4000S-0832 and S-4000S-MR system software to the most recent version.
Products:S-4000H / S-4000S-0832 / S-4000S-3208 / S-4000S-MR
Version history
[ → Ver.2.500 ]
- You can remote-control the Preamp by using S-4000R or S-4000 RCS even if a SLEVE equipment or M-48 is not connected when the REAC mode is MASTER.
- Supports 44.1 / 48 kHz sampling rates on S-4000H. Therefore, it can be connected with V-Mixer.
* S-4000H will be displayed on V-Mixer as S-4000S that has 32out / 8in when it is connected with V-Mixer such as M-400.
Items to prepare for the update
Following items are required to perform the update.
- S-4000S or S-4000H itself
- S-4000 RCS (Version 2.0 or later)
- Windows PC equipped with serial (RS-232C) port and can run S-4000 RCS software properly.
- Serial cable (The remote cable contained as part of S-4000R accessory or ordinary sold RS-232C cable : D-Sub 9pins, male-female, straight type)
How to download and expand the archive file
Download the file named "s4000_v2500.zip".
It is an archive file in zip format, please double click on the file to expand. After expanding the file, the folder "s4000_v2500" holding the file "S-4000.BIN" will be appeared.
How to update
Please refer to the attached document "Process to update S-4000S/S-4000H" (S-4000S_update_e2.pdf) for more information such as the update procedure.
License Agreement
Be sure to read the Safety Instructions and the License Agreement before proceeding download.