RC-30

Loop Station

Information
Manuals
Downloads
Confirmation
FAQ

UtilitiesRC-3/RC-30 Demo Phrases

This is the factory preset data of the demo phrases.
You can initialize the phrase memory of the RC-3/RC-30 to the factory preset demo data by copying the WAV files included in this data to it.

Products：RC-3 / RC-30

What you will need to recover your RC-3/RC-30

RC-3/RC-30
USB cable (It must be compatible with USB 2.0 Hi-Speed.)
A computer with a USB connector (Windows XP/Vista/7, MacOS X)

Getting the recover files

Please open/extract the downloaded “rc3_demo_phrases.zip” file on your computer to get the recover files in the “rc3_demo_phrases” folder.

Restoring the demo phrases to your RC-3/RC-30

NOTE
* Put off one WAV file in the each folder "0XX_1" in the folder "ROLAND" - "WAVE." (The XX in “0XX_1” is the phrase memory number.)
* If a WAV file is in the folder previously, delete the phrase by the procedure of the "Deleting a Phrase" section on the owner's manual or remove the WAV file in the folder after backing up the WAV file to your computer.
* You must not do the following operations on restoring. Doing so might make your computer freeze, or might result in the loss of all of the RC-3/RC-30's data.

Turn off the RC-3/RC-30's power.
Disconnect the USB cable.
Allow your computer to enter suspend (standby) or hibernate mode, restart it, or shut it down.

Turn on the RC-3/RC-30’s power (insert a plug into the OUTPUT A(L) jack).
* The RC-3/RC-30 will not operate on USB bus power. We recommend that you use an AC adaptor (sold separately) to ensure that the power does not turn off while connected via USB.
Use a commercially available USB cable to connect the RC-3/RC-30's USB connector to your computer's USB connector

When the RC-3/RC-30 is recognized from your computer correctly, the display of the RC-3/RC-30 will indicate "Cn".
* You can’t make USB connections if the RC-3/RC-30 is not stopped, or if there is a phrase that has not been saved.
Open the folder "WAVE" in the folder "ROLAND" on the drive "BOSS_RC-3(BOSS_RC-30)."

[ Windows users ]
Within My Computer (or Computer), open "BOSS_RC-3(BOSS_RC-30)" (or Removable Disk).
[ Mac OS users ]
On the desktop, open the "BOSS_RC-3(BOSS_RC-30)" icon.
Copy (drag and drop) the each files "090_1.WAV" - "099_1.WAV" in the folder "rc3_demo_phrases" into the each folders "090_1" - "099_1" in the folder "WAVE."
After the copy has been completed, unmount or remove the drive on your computer.
* Refer to the step four of the "Connecting to Your Computer via USB" section in the owner's manual.
Disconnect the USB cable from your computer.
After displaying the message "dC" on the display, press the [RHYTHM ON/OFF] button.
The “dC” indication will disappear from the display, and the RC-3/RC-30 will return to normal operation.

License Agreement

Roland Software License Agreement In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages. This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement. 1. GRANT OF LICENSE Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement. (a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE. (b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy. 2. COPYRIGHT The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties. Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland. 3. OTHER RESTRICTIONS (a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo. Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden. (b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions. (c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer. (d) You may not use the Software from multiple locations of a multi-user or networked system at any time. 4. NO WARRANTY Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose. 5. NO LIABILITY Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK. In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors. 6. TERMINATION OF THE LICENSE Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE. 7. GENERAL (a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof. (b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws. --------------------------------------------------------------------- Copyright (C) 2013 Roland Corporation. All rights reserved.

Be sure to read the Safety Instructions and the License Agreement before proceeding download.

Go back to the list

Product Support

Link

GPL/LGPL

RC-30

UtilitiesRC-3/RC-30 Demo Phrases

License Agreement

Download file