R-09HR Ver.3.0

WAVE/MP3 Recorder

UpdatesR-09HR System Program Version 3.02

This program is used to update the R-09HR system software to the most recent version.

Products:R-09HR Ver.3.0


Table of Contents
How to know the version 
Before you start, check the system program version of your R-09HR.
  1. Turn R-09HR power off.
  2. Turn R-09HR power on. And then check the version on the display of your R-09HR.
    Note: * If this shows the latest version, there’s no need to update your R-09HR.
    * You can update from any versions.

Update history
[Version 3.02]
[BUG FIX] The following bugs fixed.
  • Fixed the phenomenon which pop noise occurred when playing with some types of SD Card.
[Version 3.01]
[BUG FIX] The following bugs fixed.
  • Data on the specific SD memory card cannot be played.
  • When renaming a file or a directory with the specific directory structure on a SD memory card, the R-09HR freezes.
[Version 3.00]
[IMPROVEMENT]
For the details, please refer to the "Announcement of Functions Newly Added to R-09HR Ver. 3.0".
[BUG FIX] The following bugs fixed.
  • Limiter rarely works incorrectly.
  • At recording, noise might be generated by switching sampling frequency.
[Version 2.01]
[BUG FIX] The following bugs fixed.
  • Fixed sleep state issue of Windows 7 and/or MacOS X.
  • Fixed "Divide" function issue.
[Version 2.00]
[IMPROVEMENT]
  • Added Self-Timer Recording function
  • Added File Divide and File Combine functions
  • Added Metronome function
  • Added Tuner function
For the details, please refer to the "Notice of New Functionality (Ver.2.0)".

What you will need to update your R-09HR
  • R-09HR
  • A USB cable included in a R-09HR
  • A SD Memory Card (We recommend a SD Memory Card included in a R-09HR)
    * The SD memory card is needed to be formatted on a R-09HR and

Caution when performing the update
  • Never apply this update data to any product other than the R-09HR. This update data may destroy the data or system program of other products.
  • Be sure to power the unit using the AC adaptor. Executing the update while running on only battery power may cause the update to fail and result in incorrect operation if the batteries go dead before the update finishes.
  • Never power-off your R-09HR while the update is in progress!
    If a power failure or similar accident occurs during the update process, the R-09HR won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
  • We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Getting the update file
  • Please open/extract the downloaded “r09hr_sys_v302.zip” file on your computer to get the update files named “R09HR_PRG.UPD” in the “r09hr_sys_v302” folder.

Procedure for the update
  • Never power-off your R-09HR while the update is in progress!
  • The update causes initialization of the contrast of the display, the recording format and so on. We recommend that you note down your settings before updating.
  1. Turn R-09HR power off.
  2. Insert the SD memory card to the R-09HR.
  3. Turn R-09HR power on.
  4. Start your computer then connect the R-09HR to the computer by using a USB cable.
    -> The computer detects the R-09HR.
  5. Copy the extracted file "R09HR_PRG.UPD" onto the root directory of the R-09HR.
  6. Un-mount the R-09HR through the correct procedure, then disconnect from the computer.
    [Windows]
    Use the Safely Remove Hardware icon in the Windows task tray to un-mount the R-09HR. And then disconnect the USB cable that’s between the R-09HR and your computer.
    [Macintosh]
    Drag the Drive icon of the R-09HR into the trash in the dock. And then disconnect the USB cable that’s between the R-09HR and your computer.
  7. Turn the R-09HR power off.
  8. Turn the R-09HR power on with pushing the [REC] button.
  9. When the R-09HR finds the update file, the following screen will be appeared.
    Program Update
     
    Found R09HR_PRG.UPD
     
    PROG:3.01 → 3.02
     
     
    UPdate, Push [REC]
    • The current version number is indicated at ""PROG: 3.01."
    • You might see a flash display of the message "-- no card --" or "-- no update file --." before the above message appears. It is not trouble.
    • If this shows the latest version ("PROG: 3.02" or later), there’s no need to update your R-09HR. Turn the R-09HR power off.
    • When the following messages are displayed, turn the R-09HR power off and then go back to the previous procedure to check the SD memory card and the update file.
      • "-- no card --": The R-09HR can't find the SD memory card.
      • "-- no update file --": The R-09HR can't find the update file on the SD memory card.
  10. Push the [REC] button.
    -> The followind screen will be displayed. And then update processing will be carried out automatically.
    Program Update
     
    Flash Erase
     
    ******************
    ***---------------
    ---
    You will take about thirty seconds to update.
    CAUTION!!
    While the above screen is displayed, do not turn the R-09HR power off and do not un-mount the SD memory card.
  11. When the update processing is completed, the following screen will be displayed.
    Program Update
     
     
    Complete!!
     
     
    OFF, Push [POWER]
  12. Turn the R-09HR power off.
Please verify the version number “3.02” with the procedure described in “How to know the version” part of this document.
After you perform the update, you must delete the update file from the SD memory card for the normal usage.
* After you perform the update, you must delete the update file from the SD memory card for the normal usage.

License Agreement

Be sure to read the Safety Instructions and the License Agreement before proceeding download.

Download file

To the top of page