FA-66

24Bit/192kHz FireWire Audio Capture

DriversCakewalk FA-66 Driver Ver.1.0.0 for Windows 8 / 8.1 32-bit Edition

This is the Cakewalk FA-66 driver for Microsoft(R) Windows(R) 8 / 8.1 32-bit Edition. This driver also supports ASIO(Steinberg Audio Stream I/O Interface) 2.0.

Products:FA-66

  • This driver does not work with "EDIROL FA-66."
  • This driver is equivalent to the "EDIROL FA-66 Driver Ver.1.0.0 for Windows(R) 8 / 8.1 32-bit Edition."


Software Installation
[ When the message about Windows SmartScreen is displayed ]
When the message about Windows SmartScreen is displayed on installing or executing a software, please perform the following procedures.
  1. Click the [ More info ].
  2. Click the [ Run anyway ].
* If your PC does not be connected to the Internet, Step.1 will be skipped.

CAUTION
If the sample rate of FA-66 is changed in Windows 8.1, playing and recording sounds with media player or system sounds via WASAPI, MME, or DirectSound cannot be executed.
In such a case, configure the settings as follows. (Playing and recording sounds via ASIO can be executed.)

  1. Open [Control Panel]. Click [Hardware and Sound] and [Sound].
    * When the control panel is displayed with icon view, click [Sound].
  2. Select [FA-66 OUT 1] in [Playback] and click the [Properties] button.
  3. Open the [Advanced] tab.
  4. Select a bit rate which is not currently selected in [Default Format] and click the [OK] button.
  5. Repeat Procedure 2 to 4 for [FA-66 OUT 2] and [FA-66 OUT 3] in [Playback] as well.
  6. Select [FA-66 IN 1] in [Recording] and click the [Properties] button.
  7. Open the [Advanced] tab.
  8. Select a bit rate which is not currently selected in [Default Format] and click the [OK] button.
  9. Repeat Procedure 6 to 8 for [FA-66 OUT 2] and [FA-66 OUT 3] in [Recording] as well.


System requirements
This driver has the following requirements.

Operating System
Microsoft(R) Windows(R) 8 / 8.1 32-bit Edition
* This does not work with the 64-bit Edition of Windows 8.
* This driver will not work on Windows RT.
Computer
A computer equipped with an FireWire(R)(IEEE1394) Port.
* FireWire(R)(IEEE1394) control chip from TI(Texas Instruments) is recommended.

* This driver cannot be used in a virtual Windows environment, such as Hyper-V or Virtual PC.
* Mac computers running Microsoft Windows are not supported.


* Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
* All product names mentioned in this document are trademarks or registered trademarks of their respective owners.


License Agreement

Be sure to read the Safety Instructions and the License Agreement before proceeding download.

Download file

To the top of page