AT-900

MUSIC ATELIER

UtilitiesATUP-EX Expansion/Upgrade Package Check Program

This program is to check if the ATUP-EX upgrade program can be installed correctly or not before you purchase the ATUP-EX Package.

Products:AT-800 / AT-900 / AT-900C / ATUP-EX



ATUP-EX is the upgrade program to expand your MUSIC ATELIER with New Sounds, Styles, and Features.
Please refer to the product page for detailed information.


How to use this program
  1. Unzip the downloaded atupex_chkprg.zip file.
  2. Copy " _R07_ATU " (folder) and " cka71_update.bin " (file) to the root folder in the USB memory device.
  3. Insert the USB memory device into the External USB Connector when you turn off the AT-900 / AT-900C / AT-800 power.
  4. Turn on the AT-900 / AT-900C / AT-800 power, holding the Rotary Sound [On/Off] button and Rotary Sound [Fast/Slow] buttons.
    You will see the " MUSIC ATELIER " logo after 10 seconds, and the check program will start. After that, you will see the check result on the screen.
    * It takes about up to 5 minutes to get the check result.

    • If you see the message on the screen as seen below, you can install the ATUP-EX Package correctly.
      " ATUP-EX Upgrade Package is available. "

    • If you see the following message, ATUP-EX Upgrade Package cannot be used. Please call your nearest Roland Service Center or authorized Roland distributor in your country.
      " ATUP-EX Upgrade Package is not available. Please call your nearest Roland Service Center or authorized Roland distributor in your country. "

    • If you see the following message, Floppy Disk drive or CD Drive is connected. Please remove it and try this check program from Step.3 again.
      " Floppy Disk drive or CD Drive is connected. Please remove it and try this check program again. "



License Agreement

Be sure to read the Safety Instructions and the License Agreement before proceeding download.

Download file

To the top of page