SL-20 Slicer
BOSS
SL-20 OverviewDetailsSpecificationsImageGalleryBrochures FAQDownloadsOwner's ManualDemosUpdate Info
 
Nominal Input Level
-20 dBu
 
Input Impedance
1 M ohm
 
Nominal Output Level
-20 dBu
 
Output Impedance
1 k ohm
 
Recommended Load Impedance
10 k ohms or greater
 
Tempo
30 to 250 bpm
 
Maximum recording time
40 seconds
 
Controls
START/STOP pedal, TAP pedal, EFFECT LEVEL knob, DIRECT LEVEL knob, BANK knob, PATTERN knob, ATTACK knob, DUTY knob,TEMPO knob, OUTPUT MODE button, PEDAL MODE button
 
Indicators
POWER indicator (serves also as the battery check indicator), START/STOP indicator, REC indicator, PLAY indicator, TAP indicator, MONO indicator, FIXED indicator, RANDOM indicator, PING-PONG indicator, AUTO indicator, 3D PANNNER indicator, 3D CROSS indicator, LATCH indicator
MOMENTARY indicator, TEMPO indicator
 
Connectors
INPUT jacks R/MONO, L (1/4 inch phone type), OUTPUT jacks R/MONO, L (1/4 inch phone type), EXP PEDAL jack (1/4 inch TRS phone type), MIDI IN connector, DC IN jack (DC 9 V)
 
Power Supply
DC 9 V, Dry battery LR6/R6 (AA) type x 6/AC Adaptor
*1
 
Current Draw
110 mA
 
Accessories
Owner's Manual, Leaflets ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Dry battery (R6 (AA) type (carbon) x 6) *2
 
Options
AC adaptor (PSA-series), Expression pedal (Roland EV-5)
Size and Weight
 
Width
173 mm
6-13/16 inches
 
Depth
158 mm
6-1/4 inches
 
Height
57 mm
2-1/4 inches
 
Weight
1.1 kg
2 lbs. 7 oz.

Including battery
* 0 dBu = 0.775 Vrms
*1 Expected battery life under continuous use: 7 hours (Carbon), 18 hours (Alkaline). These figures will vary depending on the actual conditions of use.
*2 The battery that was supplied with the unit is for temporary use-intended primarily for testing its operation. We also suggest replacing this with an alkaline dry cell.
*The specifications are subject to change without notice.