S-4000M

Patch input and output assignments using PC software or the M-400/M-380 V-Mixer. Automatically assign input channels using the Auto Map feature.

The S-4000M merges up to four Digital Snake heads, such as the S-0808, S-1608 and S-4000 series, and merges the input/output to a single REAC signal .Ports 1 to 4 supply REAC embedde d power to compatible product such
as the S-0808. The intelligent Auto Map function assigns input channels automatically. REAC master devices recognize the S-4000M as a single REAC slave unit even when multiple digital snake heads are connected.

The S-4000M also serves as a distributor of outputs and/or splitter. Any inputs returning from Port A (Master) are distributed to the outputs depending on the devices connected. When S-0808s are connected, specific output assignments can be set.

The M-400/M380 V-Mixer or dedicated PC Remote Control Software (S-4000RCS) configures routing, input gain, PAD and phantom power.

Enable multiple broadcast points by using up to 4 S-0808 merged into an S-4000M. Power is provided to each S-0808 over each REAC cable (Cat5e).

Use four S-0808 units around the stage and merge the I/O back to the master FOH I/O unit connected to the digital mixing console. Distribute the S-0808 units in the most convenient locations next to drum riser, keyboard area, background vocals,etc.

This system enables a variety of digital snakes to be used in an installation where many inputs or outputs may be required around a venue. Using the routing ability within the S-4000M, assign or patch to any input - all controlled via the V-Mixer.

Using the S-4000M in "THRU" mode allows 2 sets of S-0808 pairs to be used as a complete digital snake system. REAC signals travel from REAC port 1 to 2 and REAC port 3 to 4.