|
|
||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||
| | | | |
Number of Channels | ||||
Number of Channels | | 48 in, 18 BUS, 58 out | ||
AD/DA Conversion | ||||
Sample Rate | | 48.0 kHz or 44.1 kHz | ||
 | ||||
Signal Processing | | 24 bits | ||
Internal processing | ||||
Internal processing | | 56 bits | ||
Frequency Response | ||||
CONSOLE OUTPUT jacks (1 to 8) | | -2 dB / +0 dB（20k ohms load, +4 dBu） | ||
| ||||
PHONES jack | | -3 dB / +0 dB (40 ohms load, 150 mW) * Sample Rate: 48.0 kHz or 44.1 kHz * Input Connector: CONSOLE INPUT (Pad: ON, Input gain: +4 dBu, 20 Hz to 20 kHz) | ||
Total Harmonic Distortion + Noise | ||||
CONSOLE OUTPUT jacks (1 to 8) | | 0.05 % (typ., +4 dBu) | ||
| ||||
PHONES jack | | 0.05 % (typ., 40 ohms load, 150 mW) * Sample Rate: 48.0 kHz or 44.1 kHz * Input Connector: CONSOLE INPUT (Pad: ON, Input gain: +4 dBu, 20 Hz to 20 kHz) | ||
Dynamic Range | ||||
CONSOLE OUTPUT jacks (1 to 8) | | 110 dB (typ.) * Sample Rate: 48.0 kHz or 44.1 kHz * Input Connector: CONSOLE INPUT (Pad: ON, Input gain: +4 dBu) | ||
Cross Talk@ 1 kHz | ||||
CONSOLE INPUT jacks (1 to 8) | | -80dB (Pad: ON, Input gain: +10 dBu, typ.) | ||
| ||||
CONSOLE OUTPUT jacks (1 to 8) | | -100 dB (typ.) * Sample Rate: 48.0 kHz or 44.1 kHz | ||
Nominal Input Level (Variable) | ||||
CONSOLE INPUT jacks (1 to 8) | | -65 to -10 dBu (Pad: OFF) or -45 to +10 dBu (Pad: ON) | ||
| ||||
STEREO IN jacks (L / R) | | -18 to 0 dBu | ||
| ||||
TALKBACK MIC IN jack | | -50 to -10 dBu | ||
Pad | ||||
Pad | | 20 dB ON / OFF | ||
Input Impedance | ||||
CONSOLE INPUT jacks (1 to 8) | | 14 k ohms | ||
| ||||
STEREO IN jacks (L / R) | | 10 k ohms | ||
| ||||
TALKBACK MIC IN jack | | 41 K ohms | ||
Non Clip Maximum Input level | ||||
CONSOLE INPUT jacks (1 to 8) | | +8 dBu (Pad: OFF) or +28 dBu (Pad: ON) | ||
| ||||
STEREO IN jacks (L / R) | | +18 dBu | ||
| ||||
TALKBACK MIC IN jack | | +8 dBu | ||
Nominal Output Level | ||||
CONSOLE OUTPUT jacks (1 to 8) | | +4 dBu (Load impedance: 10 k ohms) | ||
Output Impedance | ||||
CONSOLE OUTPUT jacks (1 to 8) | | 600 ohms | ||
| ||||
PHONES jack | | 100 ohms | ||
Recommended Load Impedance | ||||
CONSOLE OUTPUT jacks (1 to 8) | | 10 k ohms or greater | ||
| ||||
PHONES jack | | 8 ohms or greater | ||
Non Clip Maximum Output level | ||||
CONSOLE OUTPUT jacks (1 to 8) | | +22 dBu (1 kHz, 10 k ohms load) | ||
| ||||
PHONES jack | | 150 mW + 150 mW (1 kHz, 40 ohms load) | ||
Residual Noise Level (IHF-A, typ.) | ||||
| -88 dBu (All faders: Min) -85 dBu (Main Fader: Unity, Channel faders: Unity only one CONSOLE IN channel, Preamp gain: Min) -61 dBu (Main Fader: Unity, Channel faders: Unity only one CONSOLE IN channel, Preamp gain: Max) -73 dBu (All faders: Unity, Preamp gain: Min, S-1608 + S-4000S-3208, Total 48CH) -41 dBu (All faders: Unity, Preamp gain: Max, S-1608 + S-4000S-3208, Total 48CH) * Input 150 ohms terminate * Output Connector: CONSOLE OUTPUT jacks (1 to 8) * Sample Rate: 48.0 kHz or 44.1 kHz | |||
Equivalent Input Noise Level (E.I.N.) | ||||
| -126 dBu (Main Fader: Unity, Channel faders: Unity only one CONSOLE IN channel, Preamp gain: Max) * Output Connector: CONSOLE OUTPUT jacks (1 to 8) * Sample Rate: 48.0 kHz or 44.1 kHz | |||
Network Latency | ||||
| 2.8 mS (typ.) *1 * Total System Latency of audio signal from S-1608 inputs to outputs via M-400's REAC ports (A or B). * Sample Rate: 48.0 kHz * Effects : No insert effects | |||
Connectors | ||||
CONSOLE INPUT jacks (1 to 8) | | XLR-3-31 type (balanced, phantom power) | ||
| ||||
TALKBACK MIC IN jack | | XLR-3-31 type (balanced, phantom power) | ||
| ||||
STEREO IN jacks (L / R) | | RCA phono type | ||
| ||||
CONSOLE OUTPUT jacks (1 to 8) | | XLR-3-32 type (balanced) | ||
| ||||
PHONES jack | | Stereo 1/4 inch phone type | ||
| ||||
DIGITAL OUT jacks x 2 | | Optical type, Coaxial type | ||
| ||||
Optical type, Coaxial type | | RJ-45 EtherCon type | ||
| ||||
RS-232C connector | | 9-pin D-sub type | ||
| ||||
MIDI connectors (OUT/THRU, IN) | | 5-pin DIN type | ||
| ||||
USB connectors | | USB Type A and Type B | ||
| ||||
LAMP connector | | XLR-4-31 type | ||
Display | ||||
| 800 x 480 dots Wide VGA backlit TFT full color screen | |||
Power Supply | ||||
| AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz) | |||
Power Consumption | ||||
| 95 W | |||
Accessories | ||||
| Power Cord | |||
Options | ||||
Stage unit | | S-1608 | ||
| ||||
Stage unit | | S-4000S-3208 | ||
| ||||
REAC Splitter | | S-4000-SP | ||
| ||||
REAC Optical Converter | | S-OPT | ||
| ||||
Cat5e Ethernet Crossover Cable | | SC-W100S (100 m) | ||
| ||||
Cat5e Ethernet Crossover Cable and reel | | W100S-R (100 m) | ||
|
|
||||
Size and Weight | ||||
Width | | 749 mm | 29-1/2 inches | |
| ||||
Depth | | 626 mm | 24-11/16 inches | |
| ||||
Height | | 229 mm | 9-1/16 inches | |
| ||||
Weight | | 19.8 kg | 43 lbs. 11 oz. | |
|
|
||||
|
* 0dBu＝0.775Vrms * In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.*1: When a REAC Splitter S-4000-SP or a switching hub is used in-line with REAC cables, the network latency will increase by the amount of processing delay introduced by the splitting device itself. The actual delay is dependant upon the specifications of the splitting device, though the maximum delay amount for a single splitting device should be about 200 microseconds.
|
||||
|
*The specifications are subject to change without notice.
|
||||
 |
 |
