Products

BR-600

Digital Recorder

TracksTrack: 8, V-Track: 64 (8 V-Tracks per each Track), Up to 2 tracks can be recorded simultaneously, and up to 8 tracks can be played back simultaneously.
Useful CapacityCompactFlash: 32 M-1 G bytes
Data TypeHiFi (MT2), STANDARD (LV1), LONG (LV2)
Sample Rate44.1kHz
Frequency Response20 Hz to 20 kHz (+1/-3 dBu)
Nominal Input Level (Variable)GUITAR/BASS jack: -20 dBu, MIC (TRS balanced/XLR) jack: -40 dBu, LINE IN jack: -10 dBu
Input ImpedanceGUITAR/BASS jack: 1 M ohms, MIC 1/2 jack: 2 k ohms (HOT-COLD), (TRS balanced/XLR), 1.0 k ohms (HOT-GND, COLD-GND), LINE IN jack: 30 k ohms
Nominal Output LevelLINE OUT jack: -10 dBu
Output ImpedanceLINE OUT jack: 2 k ohms, Headphone jack: 140 ohms
Recommended Load ImpedanceLINE OUT jack: 20 k ohms or greater, Headphone jack: 32-100 ohms
Residual Noise LevelLINE OUT jack: -85 dBu or less (INPUT SELECT: GUITAR/MIC, input terminated with 1 k ohms, INPUT SENS: CENTER, IHF-A, typ., EFFECT: OFF)
InterfaceUSB Connector
Display16 Characters x 2 Lines (Backlit LCD)
ConnectorsGUITAR/BASS jack (1/4 inch phone type), MIC 1 jacks ( TRS balanced 1/4 inch phone type), MIC 2 jacks (TRS balanced 1/4 inch phone type), LINE IN jack (Stereo miniature phone type), LINE OUT jack (RCA phono type), FOOT SW/EXP PEDAL jack (1/4 inch phone type), PHONES jack (Stereo 1/4 inch phone type), USB connector
Power SupplyDC 9 V; Supply AC Adaptor (PSA series)/Size AA Dry battery x 6
Current Draw200 mA, Alkaline dry cell batteries, Approximately 5 hours (with continuous playback of 8 tracks), May vary according to usage conditions, batteries used, and type of CompactFlash used.
AccessoriesSoft Case, Size AA alkaline dry cell batteries (6), TRS-XLR converter cable, Demo Card (Already inserted when the BR-600 is shipped), Owner's Manual, Separate sheet (“About Memory Cards” etc.), Roland Service (information sheet)
OptionAC Adaptor: PSA series, Foot Switch: FS-5U, Pedal Switch: DP-2 (Roland), Expression Pedal: EV-5 (Roland), FV-300L/FV-500L/FV-500H
System Requirements
In case of USB 2.0 (Hi-SPEED USB) [Windows]
OSMicrosoft® Windows® XP Home SP1/XP Professional SP1
ComputerWindows XP compatible computer equipped with a USB 2.0 (Hi-SPEED USB) port
CPU/ClockPentium® III, Pentium® 4, Pentium® M Processor 1.2 GHz or higher.
Memory(RAM)256 MB or more
System Requirements
In case of USB 1.1 (Full-SPEED USB) [Windows]
OSMicrosoft® Windows® XP Home/XP Professional/Me/2000/98SE
ComputerWindows XP/Me/2000/Me compatible computer equipped with a USB 1.1 (Full-SPEED) port
CPU/ClockPentium®, Celeron® or Intel compatible processors / 600 MHz or higher
Memory(RAM)128 MB or more
System Requirements
In case of USB 1.1 (Full-SPEED USB) [Macintosh]
OSMac OS X 10.2.3 or later
ComputerApple Macintosh series with on-board USB port
CPU/ClockPowerPC G3/600 MHz or higher (PowerPC G4 is recommended)
Memory(RAM)256 MB or more (512 MB or more is recommended in Mac OS X)
Size and Weight
Width
257 mm10-1/8 inches
Depth
183 mm7-1/4 inches
Height
27 mm1-1/8 inches
Weight
700 g1 lbs. 9 oz.

In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.

UP