DM-2100

2.1-ch Speaker System

DM-2100
Discontinued

The DM-2100 2.1-ch Speaker System is an affordable way to add accurate reference monitoring with a subwoofer for enhanced bass response. The left and right speakers each offer 15 watts of power, while the 50-watt subwoofer provides a powerful low-end boost. And with 24-bit/96kHz digital inputs, the DM-2100 is perfect for use with Roland/BOSS digital studios and instruments, or with computer systems and more.

Deep, Rich Sound for a Variety of Monitoring Needs

The DM-2100 provides flat and accurate monitoring for a variety of applications. With its 50-watt subwoofer and 24-bit/96kHz digital inputs, this affordable 2.1-channel system is ideal for use with digital recording gear, musical instruments, computer-based setups or any type of nearfield monitoring. The specially designed bass-reflex cabinet delivers clear, punchy sound while occupying a minimal amount of space.

Easy Connections and Sound Control

Hooking up the DM-2100 is a snap. All inputs go directly into the right speaker, which serves as the preamp. The subwoofer then supplies power for the entire system via dedicated left and right speaker outputs. All controls—including power, input levels, Tone and Low Boost—can be easily adjusted from the right speaker’s front panel. Hearing your music with heart-pumping bass was never so easy and affordable.

Rated Output Power
50W + 15W + 15W
Speaker
Subwoofer: 16cm, Satellite Units: 9.2cm
Nominal Input Level
Line 1: -10dBu, Line 2: -10dBu
Input Impedance
18k ohm
Controls
R Channel: Bass Control Knob, Treble Control Knob, Volume 1 (Digital In/ RCA pin), Volume 2 (1/4” phone), Power Switch, Digital Input Select Switch, Phase Switch
Connectors
R Channel: Line 1 Jack (L, R; RCA pin), Line 2 Jack (L (MONO), R; 1/4” phone), Optical Input Connector, Coaxial Input Connector, Dedicated connector for power control and audio signal, Channel Input Jack (R; RCA pin),
L Channel: Channel Input Jack (L; RCA pin),
Sub Woofer: Dedicated connector for power control and audio signal, Channel Output Jacks (L, R; RCA pin), AC In Jack
Digital Input
Sampling Rate 32/44.1/48/96 kHz, D/A Convertor 24 bits
Power Supply
AC117, 230 or 240V
Accessories
Speaker Cables (RCA pin type), Dedicated Cable for power control and audio signal, Power Cable
Size and Weight ( Satellite Units )
Width
130 mm
5-1/8 inches
Depth
160 mm
6-5/16 inches
Height
200 mm
7-7/8 inches
Size and Weight ( SubWoofer )
Width
240 mm
9-1/2 inches
Depth
300 mm
11-13/16 inches
Height
330 mm
13 inches
* 0 dBu=0.775 Vrms
*The specifications are subject to change without notice.

DOWNLOADS

Support

If you have questions about operating your Roland product, please check our Knowledge Base for answers to the most common questions.
You can also contact our Product Support department by phone or email.
In addition, we have a library of Owner’s Manuals and Support Documents that you can download and reference.

Owner's Manuals